Order #15162. I must hold the record for the most prolonged installation! Pre-ordered in Nov 2021, my Ivar 5 high was delivered in January as soon as Stovefitters received a new batch and before the huge demand arising from the energy crisis. Due to other commitments the fireplace didn't get started until November 2022 and the installation was signed off a few days before Christmas.
Building wise everything went smoothly and then I tried to get a HETAS engineer to connect the flue. IMPOSSIBLE! If they wanted to know at all the story was always the same - fully booked months in advance. One guy was unpleasant and rude! Fortunately with help from the Stovefitters Manual and website it was quick and easy to use local building control which cost only £250 +vat. Some self installer tips; 1. Heat resistant black spray paint applied by fine brush colour matches brown fire putty around the stove pipe. 2. Although using Vitcas heat resisting plaster in the recess, I added polypropylene fibres to help resist any possible cracking. It also enabled a stronger weatherproof mortar mix around the chimney pot. Available from any builders merchant.
The fire has exceeded expectations. Chose the High version as it throws the heat and looks better not because of the hearth. I have the optional multifuel kit and much prefer smokeless fuel for it's heat, longevity and appearance but it's obviously nice to burn free wood. I've yet to get a bulk bag of hardwood, I hope it's much slower burning. I left out the DEFRA screw because I'm not slumbering wood and it's easy to keep solid fuel going overnight, 8 to 12 hours is no problem depending how it's loaded. With softwood we'd nip out to do shopping and return to find the fire out. If we fully loaded it with wood the heat is overpowering and restricting the air soots up the glass and no doubt the flue. Maybe a piece of 10mm Vermiculite to cover the grate might help it burn slower and be a quick way to optimize it for burning wood without the 10 minute job of removing the kit.
The grate doesn't reduce the firebox volume by much. Maybe 50mm. I hadn't considered the effect of solid fuel sulphur on the glass. I've got almost invisible but annoying crazing from overzealous slumbering of said fuel so I don't bother anymore as either fuel is easy to get going in the morning and residual heat in the fireplace brickwork keeps the room toasty anyway. I purchased the Valiant stove pipe fan, also a stove top fan which work well to distribute the heat. From other reviews I expected the handle coming loose and it wasn't long before it happened to ours. However the key is to loosen the grub screw 1/4 turn before check tightening and do this hot and cold several times. I found it's now stabilized and no longer works loose. I didn't use any threadlocker.
The stove compliments our 6kw solar panels well. Our gas boiler is super efficient for hot water, it costs less than 60p/day for a tank of that so I'm happy to have the Ivar instead of a stove boiler which use more fuel to counter lower firebox temperatures. The Clearview Pioneer 400 (with boiler) I'd considered couldn't be used for central heating, 8000 btu's mean only hot water. Heat from the log burner distributes throughout the bungalow where doors are open and burning scrap wood saves about £4/day (3.78p/kWh) instead of gas central heating in a cold December. Burning solid fuel costs about £6/day or half 20kg bag of solid fuel. Latter is worth it over kiln dried wood, there's a YouTube video 'wood vs coal' which I think is accurate that wood needs loading every 45 mins vs 4-6 hours, burn rate (per kg) of wood is double so more expensive unless you have a supply of free wood. Also see: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/933099/burning-wood-consult-bsria-report1.pdf
Finally a word about the excellent service and comms between myself and the Stovefitters team. Can't thank them enough and think of their help nearly every time I look at my beautiful fire. Cheers!
Edit: So I found a local supplier of Azobe (Ekki) hardwood in bulk bags for £60, basically untreated railway sleeper offcuts. It burns amazingly, keeps the glass clean and one lump lasts 2-3 hours with terrific heat. This could replace my preferred fuel but is still messy compared to ovoids. Video of both fuels burning below: